TM 9-2330-388-14
Section XVI. MAINTENANCE OF WHEELS, HUBS, AND DRUMS
(a) Repair tubes, para 4-52.
4-51.
Wheels, Hubs, and Drums
(b) Refer to general support maintenance for
a.
Tire and Wheel Replacement, Fig. 4-58.
repair of tires.
(1) Removal. Block any of the tires that are no
(3) Installation. Position inner wheel over studs
being removed. Jack up axle until tire is clear of ground
on axle hub. Replace ten inner stud nuts, lower tire to
Support axle with jack stand or blocking. Remove outer
ground, and tighten to 450-500 lb-ft using sequence in
stud nuts. Remove tire and wheel assembly. If inner tire
figure. Jack up axle and position outer wheel over inner
must be removed, remove the ten inner stud nuts, and
stud nuts. Lower tire to ground, and using sequence in
remove inner tire and wheel assembly.
Figure 4-58. Replacement of Tires and Wheels.
4-122
