TM 9-2330-398-10
2-20. NONFILTERED FUEL SERVICING INVOLVING USE OF ENGINE AND PUMP.
a. SELF-LOAD
NOTE
Use this procedure when it is necessary to use onboard engine and pump to load fuel from
storage facility to semi-trailer.
Operation begins and ends with all valves closed.
1.
Review general fuel-handling instructions (para 2-16).
2.
Make sure all valves are closed.
3.
Connect static reel grounding cable (4) to
storage facility. Remove fire extinguishers and
bring to point of operation.
4.
Start engine (para 2-17b). When engine is
warm, adjust to idle speed (1000-1200 rpm).
5.
Disconnect spring pins and turn hose trough
bars out of the way to remove 4-inch (10.16-cm)
bulk fuel hose from hose trough.
6.
Remove dust cover (5) from outlet B (6) and
connect bulk fuel hose to outlet B (6) and
storage facility.
7.
Put valve E (2) in LOAD position.
8.
Pull emergency valve A control handle (1) to
OPEN position.
9.
Open valves B and G (7 and 8).
10.
Adjust engine throttle for desired flow rate (refer
to Table 2-3).
Table 2-3. Fuel-Dispensing Flow Rates in Gallons per Minute (GPM)
DISPENSING
BULK DELIVERY
SELF-LOAD
FILTERED
NONFILTERED
FILTERED
NONFILTERED
ENGINE RPM
2200
2400
1200
2400
2200
2400
2200
2400
PUMP GPM
290
320
44
88
44
88
175
190
480
530
2-52
