TM 9-2350-222-10-2
OPERATE MOLDBOARD (STOW MOLDBOARD) - Continued
3. Push locking hook handle (D) forward as far as it will go.
4. Lift and pull back locking hook handle (D) until tabs (E) pass thru
slot in top of block (F).
5. With tabs (E) to rear of block (F), set locking hook handle (D)
back into narrow part of slot in block (F).
6.
Move BULLDOZER CONTROL VALVE lever (B) to FLOAT
position. Locking hooks (G) will rest on pins (H).
TA132402
7. Set SELECTOR VALVE lever (A) to NEUT.
8.
Move BULLDOZER CONTROL VALVE lever (B) to HOLD
position.
