TM 9-2590-209-14&P
g. Remove gear (13).
k. Tap shaft of gear (8) with a rawhide mallet, and
remove gear (8) and gasket (7).
h. Lift hydraulic pump housing (12) off end cover
(15).
I. Remove two bearings (4), wear plate (6),
preformed packing (5), snapring (3), and two seals (2
i. Brush wear plate (6) remaining on top of end
and 14).
cover (15) with blue layout dye to insure proper
assembly.
instructions.
I. Invert end cover (15). Using snapring pliers,
remove snapring (1) from outer end of gear (8).
6-16. Inspection. Check the component parts for
wear limits as specified in table 62.
Figure 6-5. Disassembly or assembly of hydraulic pump assembly.
6-6