TM 9-4110-254-14
(4)
Remove conduit locknut (16) and strain relief cable bushing (15).
(5)
(6)
Tag capillary tubes (17) and loosen five flare nuts (18) from tees (19) and carefully pull tubes away from
tees being careful not to bend or kink tubes.
(7)
Remove two tees (19).
(8)
Remove two caps and chains (20) and one elbow (21).
(9)
Remove four screws (22) Pull two service valves (23) away from compressor (5) being careful not to
bend or kink tubing (24). Remove two service valve gaskets (25) and suction screen (26) Discard gaskets.
WARNING
Compressor weight exceeds 240 lb (109 kg). Use appropriate lifting
device to avoid personal injury.
(10)
Remove four locknuts (27), mounting spacers (28), and compressor (5). Discard locknuts.
(11) Remove four mounting springs (29) and shipping brackets (30)
(12) Remove four nuts (31), screws (32), lock washers, (33). Discard lock washers.
(13) De-braze two service valves (23) from tubing (24) (para 5-9).
d. Disassembly.
NOTE
Disassemble only as necessary to replace defective component(s).
(1)
Remove rune screws (6), cylinder head (7), cylinder head gasket (8), valve plate assembly (9), four reed
valves (10), and valve plate gasket (11). Discard gaskets
(2)
Remove four screws (34) and terminal box (35).
(3)
Remove three screws (36), fused cluster terminal (37), and fused cluster seal (38) Discard fused cluster
terminal and seal
(4)
Remove 10 screws (39), terminal plate (40), and terminal mounting plate gasket (41) Discard gasket.
(5)
Remove two screws (42) and protector (43)
(6)
Remove three screws (44), sight glass (1), and seal (45). Discard seal.
(7)
Remove six screws (46), oil pump (47), and oil pump gasket (48). Discard gasket.
(8)
Remove two screws (49), lock washers (50), and mounting foot plate (51).
(9)
Remove 17 screws (52), bottom plate (53), and bottom plate gasket (54). Discard gasket.
5-79