TM 9-4110-255-14
4-36. TEMPERATURE SWITCH S3 REPLACEMENT .-Continued
b. Installation.
(1) Install temperature switch (4), and secure using two tie down straps (3).
(2) Install new tab housing (5) and tab (2) onto each temperature switch (1) wire lead (para 4-19).
(3) Using tags and wiring diagram (fig. 1-4), connect tabs (2). Remove tags.
(4) Install any insulation (1) that was removed and secure wth insulation tape as necessary.
i
NOTE
FOLLOW-ON MAINTENANCE:
Install access panel (para 4-16). Connect battery (para 4-35) and put unit back into service.
4-94
