TM 9-4110-255-14
(4)
Install ground strap (5), four flat washers (4), and new self locking nuts (3).
(5)
If removed, install ground strap (5), bolt (9), flat washer (8), new lock washer (7), and nut (6).
(6)
Using tags and wiring diagram (fig. 1-4), connect wire leads (1). Remove tags.
NOTE
FOLLOW-ON MAINTENANCE:
Install and adjust engine V-belts (para 4-38).
Connect fuel return hose to hose connector (para 4-63).
Connect fuel supply hoses to fuel pump (para 4-62).
Install fuel filter and bracket (para 4-56).
Connect injection pump to fuel filter hose assembly onto fuel filter (para 4-62).
Install engine drain hose (para 4-60).
Install fuel solenoid (para 4-54).
Connect engine temperature switch wire lead (para 4-53).
Connect engine oil pressure switch wire lead (para 4-52).
Connect starting motor wire leads (para 4-55).
Install air cleaner and adapter (para 4-50).
Install muffler and exhaust adapter (para 4-51).
Fill engine with appropriate lubricating oil (para 4-7).
Install battery frame and battery (para 4-35).
Install top access panel (para 4-13).
Close left side door.
Close front door.
Put unit back into service.
4-143
