TM 9-4110-255-14
(2)
In-line fuel filter to fuel pump hose assembly.
(a) Cut tie down straps (10) and remove loom (11).
(b) Note in-line filter (3) flow direction then loosen two clamps (12) and remove hose (13).
(c) If eye (14) is damaged, remove union (15), washer (16), eye, and washer (17). Discard washers.
(3)
Fuel pump to fuel filter hose assembly.
(a)
Cut tie down straps (18) and remove loom (19).
(b) Loosen two clamps (20) and remove hose (21).
(c) If eye (22) is damaged, remove union (23), washer (24), eye, and wash r (25). Discard washers.
e
(d) If eye (26) is damaged, remove union (27), washer (28), eye, and washer (29). Discard washers.
(4)
Fuel filter to injection pump hose assembly.
(a) Remove screw (30), flat washer (31), and cylinder casing (32).
(b) Cut tie down straps (33) and remove loom (34).
(c) Loosen two clamps (35) and remove hose (36).
(d) If eye (37) is damaged, remove union (38), washer (39), eye, and washer (40). Discard washers.
(e) If eye (41) is damaged, remove it.
1 Remove top access panel (para 4-13).
2
Remove three screws (42), cover (43), and gasket (44). Discard gasket.
3
Remove union (45), washer (46), eye (47), and washer (48). Discard washers.
4
Remove union (49), washer (50), eye (51), and washer (52). Discard washers.
5
Remove union (53), washer (54), eye (41), and washer (55). Discard washers.
4-147
