TM 9-4110-255-14
(10)
Using tags and wiring diagram (fig 1-4), install wire leads (6), and two nuts (7). Discard tags.
(11)
Slide control box assembly (24) back into position.
(12)
Install six screws (23).
(13)
Fill fuel tank (21) with appropriate type and quantity fuel (para 4-7).
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Close both side doors.
Connect battery (para 4-35) and put unit back into service.
4-68. GASKET (HEAT SHIELD) REPLACEMENT .
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Silicone RTV
Refrigeration unit removed from refrigerator
1, Appendix E
enclosure (para 4-6).
Gasket
F-12, Appendix F
Gasket
F-13, Appendix F
a. Removal.
NOTE
Remove only the individual gasket pieces that need to be replaced.
(1) Remove eight screws (1), two gasket retainer strips (2), and top gasket (3). Repeat for bottom gasket.
(2) Remove eight screws (4), two gasket retainer strip (5), and left side gasket (6). Repeat for right side
gasket.
b. Installation.
(1) Coat the cut surfaces of gasket(s) (3) and/or (6) with silicone RTV to seal foam.
(2) Install left side gasket (6), two gasket retainer strips (5), and eight screws (4). Repeat for right side.
(3) Install top gasket (3), two retainer strips (2), and eight screws (1). Repeat for bottom gasket.
(4) Seal four seams (7) with silicone RTV.
4-163
