TM 9-4110-258-13
SECTION III OPERATOR'S MAINTENANCE PROCEDURES
INDEX
Para
ENCLOSURE
General................................................................................................
Cleaning ..............................................................................................
3.3
GENERAL.
With the exception of service and inspection procedures noted in the PMCS table 2-1, the following maintenance
procedure is the only one authorized to the operator.
3.4
CLEANING.
This task covers:
a. Cleaning
INITIAL SETUP
Equipment Conditions:
General Safety Instructions:
Reference
WARNING
Doors open as necessary.
High voltage and exposed rotating parts are
contained in the refrigeration unit. Personal
Materials/Parts:
injury can result if power is connected.
Detergent
6, Appendix E
Rag
2, Appendix E
Cleaning.
(1) Mix a small quantity of detergent with clean water to make a wash solution.
(2) Dampen a rag with wash solution and clean the equipment.
(3) Dampen a rag with clean water and rinse the equipment. Rinse rag in clean water and continue until all
detergent residue has been removed.
(4) Wipe the equipment with a clean dry rag until thoroughly dry.
3-3/(3-4 blank)
