TM 9-4110-258-13
(5) Install suction screen (27), two new service valve gaskets (26), service valves (24), and four screws (23).
(6) Wrap anti-seize tape around threaded end of each elbow (22). Install two elbows and one cap and chain
(21) onto each elbow.
(7) Wrap anti-seize tape around threaded end of each tee (19) and elbow (20). Install three tees and elbow.
(8) Aline capillary tubes (17) with tees (19) and elbow (20) using tags as reference being careful not to bend or
kink tubes. Tighten six flare nuts (18).
(9) Install strain relief cable bushing (15) and conduit locknut (16).
(10) Push wire leads (13) through strain relief cable bushing (15). Install wire leads, using tags and wiring
diagram (fig. 1-4), and four screws (14). Remove tags.
(11) Install cover (4) and two screws (3).
(12) Replace dehydrator (para 5.15).
(13) Leak check (para 5.11), evacuate (para 5.12), and charge (para 5.13) the refrigeration system.
NOTE
FOLLOW-ON MAINTENANCE:
Close both side doors.
Close front door.
5-81
