TM 9-4110-258-13
5.41
PLATES (DATA) REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
General Safety Instructions:
Refrigeration unit shut down (para 2.7) and power
WARNING
disconnected.
High voltage and rotating parts are used in
the refrigeration unit. Personal injury can
result if power is connected.
a. Removal.
(1) Drill through rivets using drill bit slightly smaller than rivet diameter.
(2) Remove plate and any remaining rivet material.
b. Installation. Install new plate and rivets as required.
5-83
