TM 9-4120-370-14
TO 35E9-229-1
REMOTE MOUNTING OF CONTROL PANEL
This paragraph is applicable only when the control panel is to be remote mounted. If the control panel is to be removed
from the unit and installed in a remote location, follow instructions of this paragraph.
Be sure input power is disconnected before doing any work inside the air condi-
tioner cabinet. Voltages used can kill.
Using allen wrench, loosen setscrew and remove front fresh air damper control knob.
a.
Using screwdriver, remove twelve screws and flat washers. Remove conditioned air intake grille. Be careful
b.
not to damage grille gaskets.
c. Check that electrical connector cover has been unscrewed from connector.
