TM 9-4120-378-14
5.25 DEHYDRATOR-INSPECT/REPLACE .
This task covers inspect, removal and installation.
INITIAL SETUP
Equipment Conditions:
Remarks
Location/Item
Action
Right Rear Top
of Housing
Inspect
Removal
Check that power source is discon-
nected. Check that refrigerant system
is discharged.
Unscrew flare nuts (1) and remove refrigerant lines
a.
from dehydrator.
b.
Remove two screws (2) and straps (3) to remove
dehydrator (4).
c.
Remove dehydrator (4).
a. Check the direction arrow marked on the dehydra-
`installation
tor.
b.
Position dehydrator (4) between refrigerant lines.
c.
Tighten flare nuts (1).
d.
Install straps (3) with screws (2).
Leak check refrigerant system.
e.