TM 9-4120-388-14
4-7. REMOTE MOUNTING OF CONTROL PANEL-Continued.
NOTE
If your unit was not supplied with a block off assembly, order part (97403)13215E9885.
Connect plug (P7) to inside portion of bulkhead connnector provided with block off assembly.
w.
NOTE
Block off assembly is also equipped with a removable cover and mounting holes for alter-
Reinstall return air filter, retainer, intake grille, and lower panel.
x.
Fabricate an interconnecting cable/harness of the required length to connect the P7 block off mounted connec-
y.
tor and the J7 control panel connector.
Figure 4-8. Interconnecting Remote Control Cable Diagram
Install interconnecting cable between block off assembly bulkhead connector and control panel receptacle (J7).
z.