ALTERNATE INPUT POWER CABLE CONNECTOR (J1) LOCATIONS

9-4120-388-14

4-9. ALTERNATE INPUT POWER CABLE CONNECTOR (J1) LOCATIONS. The following instructions apply only if

relocation of the input power cable connector is required.

Preliminary procedures

1. Remove rear panel. (See para 4-31.)

2. Remove lower front paneI (See para 4-28.)

3. Remove conditioned air intake grille. (Set para 4-24.)

Figure 4-11. Alternate Input Power Connector Locations

Determine which alternate location is best.

b. Remove four screws, Iockwashers, and nuts from cover plate.

Figure 4-12. Cover Plate Removal/Installation