TM 9-4120-388-14
4-7. REMOTE MOUNTING OF CONTROL PANEL-Continued.
d. Remove grille.
Loosen two captive stud fasteners in filter retainer.
e.
Remove retainer and filter.
f.
g. Remove screw, Iockwasher, flat washer, and damp from remote sensing bulb.
h. Disconnect plug (P7) from receptacle (J7).
i.
Loosen four captive panel fastener screws injunction box mounting flanges.
Carefully slip junction box out far enough to gain access to control panel mounting screws.
j.
k. Remove four screws from control box.
Remove grommet from remote sensing bulb capillary line.
l.
