Figure 4-13. J1 to P13 Harness Removal

TM 9-4120-388-14

4-9. ALTERNATE INPUT POWER CABLE CONNECTOR (J1) LOCATIONS - Continued.

Remove cover plate and gasket if applicable.

d. Disconnect plug (P13) from receptacle (J13).

Figure 4-13. J1 to P13 Harness Removal

Remove the (J1 ) to (P13) harness from the unit.

Remove four screws, Iockwashers, and nuts from receptacle (J13).

Figure 4-14. Receptacle (J13)

Pull receptacle (J13) down and out of bulkhead.

Reconnect harness plug (P13) to receptacle (J13).

Install receptacle (J1) into the new connector location.