Table 2. TroubleshootingContinued
Malfunction
Corrective action
Probable cause
b. Loosen distributor clamp and
b. Rubber jaws on distributor
distributor chuck, aline dis-
chuck set before distributor
tributor and tighten distribu-
clamp was tightened.
tor clamp and chuck jaws.
Tighten clamp before chuck
jaws are set (par. 27b).
c. Refer other causes to organi-
c. Other causes -----------------
zational maintenance person-
nel for correction.
a. Secure vacuum hose tightly on
a. Vacuum hose not tight on
4. Vacuum pump fails to create
adapter.
desired vacuum control to
adapter of vacuum control.
b. Refer other causes to organi-
distributor.
b. Other causes -----------------
zational maintenance person-
nel for correction.
a. Zero each meter prior to
a. Meters not zeroed ------------
5. Speed meter, cam dwell
testing each distributor
meter, and vacuum meter
do not register same upon
b. Other causes -----------------
b. Refer other causes to organi-
testing more than one dis-
zational maintenance per-
tributor.
sonnel for correction.
21
