TM9-4935-481-14-1
Table 3-11. DMS-D Performance Test-Continued
DMS-D
Performance Test-Continued
STEP
UNIT
PROCEDURE
CORRECTIVE ACTION
STEP
UNIT
PROCEDURE
CORRECTIVE ACTION
1455
TP
TRANSMITTER LAMP switch to NO/GO.
1474
MCP
Adjust COMPARATOR THRESHOLD B control to -7.500 0.005 Vdc.
1456
DMM
Observe a reading of 0.1750 to 0.1830 Vac.
DMM
(167)
1475
MCP
DMM INPUT switch to DMM INPUT.
1457
MCP
DMM FUNCTION switch to VDC.
1476
VWS
Adjust AMPTD(VOLTS) control to +7.89 0.001 Vdc.
0
DMM
Error Comparator Scaling
Perform steps 409 through 627.
1458
ITP
INTERNAL TEST switch to 11.
1477
TP
Momentarily actuate TEST START switch.
1459
PPE
FUNCTION TEST switch to PULSE READ.
1478
CIP
Wait until INHIB lamp illuminates before continuing.
1460
TP
MODE switch to L/R MVG.
1479
TP
Observe G lamp illuminated and NO GO lamp extinguished.
O
1461
TP
FREQ (HZ) switchto 10.0,
(168)
1462
CIP
COUNTER INHIBIT(SEC) dial to 00.21.
1480
VWS
Adjust AMPTD(VOLTS) control to +8.04 0.001 Vdc.
0
1463
CIP
RUN/HOLD/OFF switch to RUN.
DMM
1464
MCP
SELECTOR A switch to Fl.
1481
TP
Momentarily actuate TEST START switch.
1465
MCP
SELECTOR B switch to G22.
1482
CIP
Observe INHIB lamp illuminated before continuing.
1466
MCP
SELECTOR C switch to F4.
1483
TP
Observe GO lamp extinguished and NO GO lamp illuminated.
1467
MCP
Connect 1W20-P1 to J12 and 1W20-P2 to J13.
(168)
1468
MCP
Connect a BNC tee to J15.
1484
VWS
Adjust AMPTD(VOLTS) control to +7.11 0.001 Vdc.
0
1469
MCP
Connect adapter 10275939 to J5.
1485
TP
Momentarily actuate TEST START switch.
1470
MCP
Connect a 10215396 cable to the BNC tee and the white probe to
1486
CIP
Observe INHIB lamp illuminated before continuing.
pin "H" of the adapter.
1487
TP
Observe GO lamp illuminated and NO GO lampxtinguished.
e
1471
MCP
Remove the DMM cable 1W14 from J17.
(168)
1472
MCP
Connect a second 1W20 cable from J1(1W20-P1) to the BNC tee
7
1488
VWS
Adjust AMPTD(VOLTS) control to +6.96 0.001 Vdc.
0
(1W20-P2),
MM
1473
PPE
Momentarily actuate TEST START switch.
1489
TP
Momentarily actuate TEST START switch.
1490
CIP
Observe INHIB lamp illuminated before continuing.
3-130
