TM 9-2330-373-14 & P
4--40. REAR BUMPER
REMOVAL
1. Working under inside corner of chassis, remove
four screws (1) and washers (2) securing
bumper (3) to rear corner post and chassis rear
crossmember.
2. Remove rear bumper.
INSTALLATION
1. Position rear bumper (3).
1.
Screw
2. Secure in position with four screws (1) and
2.
Washer
washers (2).
3.
Bumper
4-41. REFLECTOR
REMOVAL
1. Remove two screws (1) securing reflector to van
body.
2. Remove reflector.
INSTALLATION
around mounting holes in van body.
2. Position reflector (2) on body and aline mounting
holes.
3. Secure with two screws (1).
1.
Screw
2.
Reflector
4-42. PINTLE ASSEMBLY
THIS TASK COVERS
a. Removal
b. Inspection and replacement
c. Installation
TA 314846
4-126