TM 9-2330-211-14&P
4-14. WIRING HARNESS (Con't)
ACTION
REMARKS
LOCATION
ITEM
b. Feed wiring harness (11) rearward along inside
(Con't)
28.
of right main beam through axle grommet (35)
hole, crossbeam grommet (36), and grom-
met holes in left and right main beams.
Longer lead goes to the left side.
c. Feed clearance light branches of wiring harness
(11) through left grommet (29) hole and right
grommet hole (34) in main beam.
Longer lead goes to the left side.
Back side of front
Pull wiring harness (11) along crossbeam to
29.
Wiring harness (11)
clearance light (19) and allow enough slack for
right clearance
connections.
light (19).
Put on wiring harness (11).
Two clips (22)
Right front
30.
crossbeam
Two clips (22)
Two screws (23),
Screw on and tighten using
in. wrench and
31.
flat-tip screwdriver.
and nuts (25)
4-33