weather promotor to the combined
Warning: Resin No. 797 and curing
agent No. 237 are harmful to the skin.
curing agent and resin and mix
Wash thoroughly with water any area
thoroughly.
of the body that may have come in
Use the spatula (or the brush in
contact with the liquid resin or cur-
h a r d - t o - r e a c h areas or when the tem-
ing agent.
p e r a t u r e is above 55F) and spread
a liberal coating of the prepared mix-
(4) Pour 3 ounces of resin No. 797 for
ture over the surface to be patched.
e a c h square foot of surface area to
Place the glass cloth ((3) above)
b e covered into the mixing cup pro-
o v e r the coating and press it lightly
v i d e d . Shake the can thoroughly be-
w i t h the applicator. Spread a second
f o r e pouring out the resin. Tempera-
l i b e r a l coating of the mixture over
t u r e and climate will determine the
the glass cloth; work from the center
quantity of curing agent and cold
o f the patch towards the edges.
w e a t h e r promoter to be added to the
( 6 ) Examine the patch to see that the
r e s i n . Use the eye dropper and pre-
e d g e s are flat and firmly embedded
p a r e the mixture as follows:
i n the mixture. Be sure the patch is
( a ) F o r temperatures above 55F, fill
c o m p l e t e l y covered by the mixture.
the eye dropper to the red line
Prepare and apply an additional mix-
w i t h curing agent No. 237. Add
ture, if necessary.
t h e curing agent to the resin and
m i x thoroughly.
F o r temperatures between 20 and
5 5 F , fill the eye dropper to the
Depending on the temperature and
red line with curing agent No. 237.
d r y i n g conditions, the patched sur-
F i l l the eye dropper to the half-
face my be sanded and painted
w a y mark with cold weather pro-
w i t h i n 4 to 24 hours after applica-
moter No. 347. Add the cold
t i o n of the patch. After the mixture
w e a t h e r promoter to the combined
in the cup and on the spatula has
curing agent and resin and mix
hardened, flex the cup and the spat-
thoroughly.
ula to crack the mixture. Clean the
cup and spatula and store them for
F o r temperatures below 20F, fill
future use. Discard the used brush;
the eyedropper to the red line with
r e c a p and store the containers.
curing agent No. 237; add the cur-
Caution: Storage life of the patch
ing agent to the resin and mix
kit materials is severely limited by
thoroughly. Fill the eye dropper to
heat; recap the containers tightly
the red line with cold weather
and store them in a cool, dry place.
p r o m o t e r No. 347. Add the cold
