e. Connect the wires to the replacement
(2) Remove the mounting screws that
component.
38).
f. Replace the cover on the power duct.
(3) Unfasten the cable clip nearest the
g. Replace the fluorescent lamp and light
26-pair cable receptacle mounting.
shield (para 37a(4) through (6)).
(4) At the power and signal entrance
panel, remove the 26-pair cable re-
53. Removal and
Replacement of
26-Pair
ceptacle cover.
Cable Receptacle
(5) Lift the receptacle insert (fig. 38)
a. Removal.
from the front of the 26-pair
(1) Remove the screws that fasten the
cable receptacle housing.
cover to the power entrance panel
(6) Tag and unsolder the wires from
the receptacle insert.