TM 5-2420-230-10
(10) Remove holding pin, allowing arm to release.
(11) Lay spare tire and carrier assembly on the ground (Para 7-3).
(12) Rotate backhoe bucket until it releases the digging teeth from spare tire and carrier assembly.
c. Installation.
(1)
Position vehicle on level ground.
(2)
Ensure PARK BRAKE lever is ON (Para 4-11).
(3)
Select N (Neutral) gear (Para 5-4).
(4)
Rotate backhoe bucket until digging teeth engage spare tire and carrier assembly.
(5)
Lift and curl spare tire and carrier assembly to balanced position (Para 7-3).
(6)
Install holding pin and arm.
(7)
Install retaining clip in holding pin.
(8)
Install travel stop on bucket cylinder (Para 7-6).
(9)
Stow backhoe assembly.
(10) Stow stabilizer arms (Para 7-5).
(11) Install boom locking pin.
(12) Install turnbuckles on stabilizer arms (Para 7-7).
(13) Install towing hitch (Para 7-4).
8-10
