TM 5-2420-230-10
b. Operation.
(1)
(2)
Pull HYDRAULIC MASTER SWITCH (21) to ON position.
NOTE
Hydraulic tool will be able operate 3 sec. after HYDRAULIC HOSE REEL SWITCH is switched ON.
(3)
Pull HYDRAULIC HOSE REEL SWITCH (22) to ON position and wait 3 sec.
Always wear eye and hearing protection when operating hydraulic tools to prevent personal injury.
Only operate tool when attachment is securely installed. Failure to do so could result in personal
injury.
Keep hand grips dry, clean, and free of oil. Failure to do so could result in personal injury.
(4)
Operate hydraulic hand tool per tool operating instructions When finished, proceed to Step (5).
(5)
Push HYDRAULIC HOSE REEL SWITCH (22) to OFF position.
(6)
Push HYDRAULIC MASTER SWITCH (21) to OFF position.
(7)
c. Disconnection.
(1)
Operate hydraulic hand tool to relieve any remaining hydraulic pressure.
Change 1
8-14