TM 55-1930-208-10
Table 2-4. Operator/Crew Preventive Maintenance Checks and Services (PMCS-Continued
INTERVAL
PROCEDURES
EQUIPMNET IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO
B
D
A
INSPECTED
OR ADJUST AS NECESSARY
AVAILABLE IF:
17
ACCUMULATOR
Inspect accumulator for
loose or missing mounting
hardware. Tighten or re-
place loose or missing
hardware.
18
ENGINE, DIE-
Inspect components for loose
SEL
or missing mounting hard-
ware. Tighten or replace
loose or missing hardware.
19
AIR CLEANER
Inspect air cleaner for dam-
age. Refer to paragraph
20
FUEL LINES
Visually inspect all fuel
Class III leaks
AND FITTINGS
lines and fittings for
are present.
signs of leaks. Notify
tify direct support main-
tenance.
21
FUEL STRAINER
Inspect fuel strainer and
Class II leaks
AND FUEL FIL-
fuel filter for damage.
are present.
TER
Refer to paragraph 3-16
service fuel strainer or
fuel filter.
22
LUBRICATION
Visually inspect filter for
Class III leaks
FILTER
damage or leaks. Refer to
are present.
paragraph 3-18 to service
or replace filter.
23
OIL COOLER
Inspect for loose or mis-
Class III leaks
sing hardware. Inspect for
are present.
signs of leakage. Notify
direct support maintenance.
24
PUMP, FRESH
Inspect for signs of leak-
WATER
age. Inspect for loose or
missing hardware. Notify
direct support maintenance.
2-10
