TM 9-2330-203-14&P
Section VI. AXLE MAINTENANCE
4-17. AXLE REPLACEMENT.
This task covers:
a Removal
b
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Service brake assembly removed (para 4-19,
Antiseizing tape (Item 15, Appendix E)
Tools/Test Equipment:
Personnel Required: Two
Eight lockwashers
General mechanic's tool kit
Jack
Two jackstands
a. REMOVAL
WARNING
Axle is heavy and awkward to handle. Use caution, provide adequate support, and
use assistance during removal. Failure to follow this warning may result in serious
Injury to personnel.
1.
Raise axle (2) with jack and support dolly frame with jackstands.
2.
Disconnect hydraulic hose assembly (1) at axle tee (3) on M 197A1 and M 198A1. Disconnect air hose assembly
(4) from each airbrake chamber (5) on M197 and M198.
4-25
