TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL - CONTINUED
Unscrew, and take off.
Bushing (2)
9. Nipple pipe(1)
Using 3/16-inch flat-tip screwdriver,
Four screws (5)
10. Cover (3) and
unscrew and take off.
box (4)
Take off.
11. Box (4)
Cover (3)
a. Using 3/16-inch drive pin punch and
Bushing (6) and
12. Box (4) and
nut (7)
ball-peen hammer, tap top of bushing
nipple pipe (1)
(6) toward van body (8) until loose.
b. Unscrew nipple pipe (1) from nut (7).
Unscrew, and take off.
Bushing (6)
13. Nipple pipe (1)
a. Using 3/16-inch flat-tip screwdriver,
Cover (10) and
14. Fitting (9)
screw (11)
unscrew screw (11) and take off.
b. Take off cover (10).
15. Elbow (12)
Two covers (13)
Using 3/16-inch flat-tip screwdriver,
pry off.
16. Coupling (14)
Nut (15)
a. Using 3/16-inch drive pin punch and
ball-peen hammer, tap right side of nut
and fitting (9)
(15) toward van body (8) until loose.
b. Unscrew all the way.
Conduit
17. Fitting (9)
Take off.
assembly (16)
Two wires (17)
Pull out from fitting (9) and nut (15).
18. Fitting (9)
and nut (15)
Nut (15)
19. Fitting (9)
Take off.
Screw (18)
20. Fitting (9) and
Using 3/16-inch flat-tip screwdriver,
elbow (12)
unscrew and take off.
Two screws (20)
21. Fitting (9),
Using number two cross-tip screwdriver,
coupling (19), and
unscrew and take off.
van body (8)
Fitting (9),
22. Van body (8)
a. Take off, and separate.
elbow (12), and
b. Repeat steps 14 thru 22a for the
coupling (19)
other side.
4-44