TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
43.
Put in place.
Coupling (23)
a.
Repeat step 43a for other coupling.
b.
Bushing (24)
44. Coupling (23),
Slip over wires (22), and screw in
a.
two wires (22),
using 3/16-inch flat-tip screwdriver.
and box (18)
Screw into coupling (23).
b.
Using ball-peen hammer and 3/16-inch
c.
drive pin punch, tap right side of
bushing (24) toward van (5) until
tight.
45. Box (18),
Bushing (17) and
Slip nut (25) over wires (14).
a.
nipple pipe (10),
nut (25)
Screw nut (25) in pipe (10).
b.
and wires (14)
Screw bushing (17) toward box (18),
c.
and using hammer and 3/16-inch drive
pin punch, tap until tight.
4-47
