TM 9-2330-227-14&P
JUNCTION BOXES, 110-VOLT - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
a. Measure position of screw holes on
Fitting (9),
23.
van body (8), and mark fitting (9)
elbow (12), and
and elbow (12) accordingly.
coupling (19)
b. Using guide marks, portable drill, and
3/16-inch twist drill, drill holes in
fitting (9) and elbow (12).
c. Put in place.
Screw in, and tighten using number two
Two screws (20)
24. Fitting (9),
cross-tip screwdriver.
elbow (12), and
van body (8)
Screw in, and tighten using 3/16-inch
Screw (18)
25. Fitting (9) and
flat-tip screwdriver.
elbow (12)
Put in place.
Nut (15)
26. Fitting (9)
Feed through.
Two wires (17)
27. Fitting (9) and
4-45