TM 9-2330-227-14&P
COMPOSITE LIGHT ASSEMBLY
This task covers:
b. Lamps, Lens, and Door Assembly
INITIAL SETUP
Tools
Personnel Required
One
Screwdriver, flat-tip, 3/16-inch
Socket, 3/8-inch drive, 9/16-inch
ACTION
ITEM
REMARKS
LOCATION
NOTE
Both composite light assemblies are removed and installed, and lamp, lens, and door
assemblies are replaced in the same way. These procedures are for one. Repeat for
the other.
REMOVAL
NOTE
Tag wires to aid in installation (page 4-4). If wire connectors are to be repaired or
Removal is not necessary for lamp, lens, or door assembly replacement. If replacing
lamp, lens, or door assembly only, go to step 4. If circuit marker bands are missing