TM 9-2330-285-14&P/TO 36A11-21-10-1
REAR AXLE BEAM
This task covers:
INITIAL SETUP
Equipment Condition - Continued
Tools
Composite lights removed - late
1 1/2-ton hydraulic floor jack
Jackstands (two required)
Personnel Required
Rear harness removed -
Two
Equipment Condition
Rear axle hydraulic brake lines
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
Since this procedure will begin with the spindles removed,
the dolly set will be supported under the rear axle by two
jackstands.
Hydraulic floor
a. Raise dolly set by placing hydraulic jack
1 Rear axle beam (1)
jack (2) and two
(2) under axle beam (1).
b. Place two jackstands (3) under rocker arms
jackstands (3)
(4) at the point where the frame adapter
(5) pivots.