TM 9-2330-356-14
(6) After the belt has been maneuvered around
the flexible rubber element, pull it through the inside of
TA222983
TA222981
(7) Aline the drive ring non-threaded mounting
holes with the threaded flywheel holes and engage the
capscrews with lockwashers finger tight. Do not fully
(8) Slide the drive ring back into position on the
flexible rubber element and pull the belt into the drive
TA222984
TA222982
(9) Check the arrangement of the drive belt for
(10) Retighten the drive ring capscrews with
lockwashers evenly in an alternating pattern. Tighten the
TA222985
capscrews with lockwashers to 10.5 lb.-ft. (126 lb.-in.)
4-133