TM 9-2330-356-14
(2) Replace four mounting screws, nuts, and
CAUTION
washers. Do not tighten mounting screws until valve R is
fitted into place.
Do not disconnect the motor junction box
from the motor. Nipple is specially packed for
NOTE
explosion resistance.
Hose reel will slide slightly from side to side to
allow room for valve R.
(5) Disconnect conduit at the top and bottom of
the junction box.
(3) Fit valve R and two split couplings in place
between hose reel and meter (para 4-85).
(6) Remove valve R.
(4) When valve R is in place, tighten mounting
screws and nuts to 20-35 lb.-ft.
(7) Remove pilot fuel flow line (fig. 5-14). Have
a container ready to catch the flow when disconnection is
(5) Tighten split coupling to 95-105 lb.-ft.
made.
(6) Connect pilot fuel flow line (fig. 5-14) to hose
(8) Remove four mounting screws, nuts, and
reel inlet.
washers on bottom of hose reel assembly.
(7) Connect leads and conduit to motor junction
.
box as tagged.
(9) Two people can now lift the hose reel, motor,
and motor function box from the cabinet.
(8) Install cover on junction box.
b.
Installation.
(9) Install hose on hose reel.
(1) Have two people lift the hose reel assembly
(10) Install hose reel cabinet to semitrailer
back into cabinet.
5-29
