TM 9-2330-371-14&P
BRAKES - HYDRAULIC, FILLING/BLEEDING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
3.
(Cont.)
c.
Have assistant pump brake pedal ap-
proximately 10 times, then hold pedal
down. Using 7/16-inch wrench, open
bleeder screw. When fluid stops, close
screw. Repeat until bubbles stop. Be
sure to keep master cylinder full of
fluid.
Repeat step 3 for other brakes.
4.
Brake master
Filler cap (2)
a.
Fill master cylinder to 1/2-inch from
cylinder (1)
top with fluid.
b.
Put in and tighten using 15/16-inch
wrench.
5.
Filler cap (2)
Vent tube
Put in and tighten using 5/8-inch wrench.
assembly (3)
NOTE
FOLLOW-ON MAINTENANCE: Test brakes
TASK ENDS HERE
4-71