TM 9-2330-371-14&P
MASTER CYLINDER
This task covers:
INITIAL SETUP
Personnel Required
Tools
One
Extension, 5-inch
Equipment Condition
Pan, drain
Screwdriver, flat-tip, 1/4-inch
Socket, 9/16-inch,3/8-inch drive
Wrench, 9/16-inch, open-end
Wrench, 5/8-inch, open-end
Wrench, 3/4-inch, open-end
Wrench, l-inch, open-end
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a. Place container under drainplug (2).
Drainplug (2) and
Master cylinder
1.
b. Using 3/4-inch wrench, unscrew,
gasket (3)
body (1)
take out, and let drain.
Using 5/8-inch wrench, unscrew and take
Hydraulic hose (4)
2.
off.
and fitting (5)
Using 9/16-inch socket, extension and
Three nuts (7) and
Master cylinder
3.
handle, unscrew and take off.
Iockwashers (8)
body (1) and
bracket studs (6)
Take off.
Master cylinder
Bracket studs (6)
4.
body (1)
Using 9/16-inch socket, handle, and 9/16-
Three nuts (11),
Bracket (9) and
5.
inch wrench, unscrew and take out.
bolts (12), and
frame (10)
Iockwashers (13)