TM 9-2330-371-14&P
MASTER CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REPAIR
Fitting (16)
Using 5/8-inch and 1-inch wrenches,
Vent tube (14)
6.
unscrew and take off.
and filler cap (15)
Clamp loop (18) and
Using screwdriver, unscrew
Vent hose (17)
7.
screw (19)
and loosen.
Vent hose (17)
Take off.
Vent tube (14)
8.
Filler cap (15) and
Using 1-inch wrench, unscrew and
Master cylinder
9.
spacer ring (20)
t a k e out.
body (1)
Drainplug (2) and
Put in and tighten using 3/4-inch wrench.
10.
gasket (3)
Vent hose (17),
a. Put clamp loop (18) and screw (19) on
Vent tube (14)
11.
clamp loop (18),
vent hose (17).
and screw (19)
b. Put vent hose (17) on vent tube (14).
c. Position and tighten clamp loop (18)
and screw (19) using screwdriver.
Filler cap (15) and
Put in and tighten using 1-inch
Master cylinder
12.
spacer ring (20)
wrench.
body (1)
Fitting (16)
Filler cap (15)
Put in and tighten using 5/8-inch wrench.
13.
to vent tube (14)
