TM 9-2330-371-14&P
SPLASH SHIELDS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Put splash shield(2) in place and line
a.
Splash shield (2),
Bracket (1)
7.
up holes.
bolt (3), washer (4),
Put in bolt (3), washer (4),
b.
Iockwasher (5),
Iockwasher (5) and nut (6) and
and nut (6)
tighten using 9/16-inch wrench,
9/16-inch socket, and handle.
a.
Place in position and clamp using
Two hinges (8)
Frame (7)
8.
C- clamps.
It may be necessary to loosen
nut (3) to position.
Weld using arc welder.
b.
TASK ENDS HERE
TA224302
4-132