TM 9-2330-371-14&P
TOOLBOX COVER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
HINGE REPAIR - CONTINUED
STORAGE BRACKET REPAIR
10.
Gooseneck (4)
Cover (3)
Raise.
Cover (3)
11.
Storage bracket (6)
a. Mark location for installation.
b. Using grinder, grind off weldments (7)
and take off.
If replacing both brackets, repeat
for other bracket.
12.
Cover (3)
Using grinder, grind off excess weldment
until surface is smooth.
13.
Cover (3)
New storage
a. Place in position according to marks.
bracket (6)
b. Weld to cover using arc welder.
See TM 9-237. If replacing both
brackets, repeat for other bracket.
TASK ENDS HERE
TA224305