TM 9-2330-371-14&P
TOOLBOX COVER
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Chalk, carpenters
C-Clamp
Chisel, cold
Personnel Required
Grinder
Hammer, ball-peen, 1 pound
One
Tape, measure
Torch, acetylene
Welder, arc
ACTION
REMARKS
ITEM
LOCATION
HANDLE REPAIR
Raise.
Cover (2)
Gooseneck (1)
1.
Washers (4)
Using acetylene torch, cut off.
Cover (2) and
2.
handle (3)
Put in place through holes in cover.
New handle (3)
3.
Two new washers (4)
Put on ends of handle and weld in place
Handle (3)
4.
using arc welder.
See TM 9-237.
TA224303