TM 9-2330-373-14 & P
4-22.
BRAKE BACKING PLATE AND SUPPORT AND ADJUSTER ASSEMBLY (cont)
REMOVAL (cont)
7. Disconnect hydraulic line at rear of backing
plate. Remove eight nuts (3), screws (4), and
lock washers (2) securing brake backing plate
(9) to axle flange. Slide backing plate off axle
spindle.
2.
Washer
3.
Nut
4.
Screw
9.
Backing plate
8. Remove nut (5) and lock washer (6) securing
adjusting gear (7) to spring and bolt assembly
(10).
9. Remove gear (7), two washers (8), and spring
and bolt assembly (10) from brake backing plate
(9).
INSPECTION AND REPAIR
1. Inspect support and adjuster assembly (1) for
breaks or cracks. Replace if defective.
2. Inspect adjusting wheel (3) for broken or missing
teeth. Replace if defective.
3. Inspect adjusting screw (4) for
damaged
threads. Replace defective screw.
4. Inspect brake backing plate (9). Straighten and
paint as required. Replace if cannot be made
serviceable.
1.
Support and adjuster assembly
7.
Adjusting gear
2.
Support
8.
Washer
3.
Adjusting wheel
9.
Backing plate
4.
Adjusting screw
10.
Spring and bolt assembly
5.
Nut
11.
Washer
6.
Washer
12.
Screw
TA 314782
4-61