TM 9-2330-376-14&P
4 - 3 5 . INERTIA BRAKE ACTUATOR AND MASTER CYLINDER ASSEMBLY MAINTENANCE
( X M 9 7 9 AND XM1061) (Con't).
7.
Install pin (22) with two flatwashers (23) and new spring pins (24).
Install lever (19) with two new self-locking bolts (20). Tighten self-locking bolts until lever no longer rotates freely,
8.
then loosen in 1/4 turn increments until lever rotates freely again.
Install two springs (12), pawl (15), and two new self-locking bolts (16). Tighten self-locking bolts until pawl no
9.
longer rotates freely, then loosen in 1/4 turn increments until pawl rotates freely again.
10.
Install accumulator (31), clamp (30), new lockwasher (29), and screw (25).
11.
Install reducer (28), straight adapter (27), elbow (17), and tube assembly (26).
12.
Install wire rope (13) and two new sleeves (14 and 32). Crimp sleeves securely.
13.
Attach new sleeve (34) to wire rope (33). Crimp sleeve securely.
14.
Install wire rope (33), thimble (18), and new sleeve (17), Crimp sleeve securely.
TA700964
4-60
