TM9-2330-376-14&P
4 - 3 5 . INERTIA BRAKE ACTUATOR AND MASTER CYLINDER ASSEMBLY MAINTENANCE
( X M 9 7 9 AND XM1061) (Con't).
Remove two grease fittings (37) from sleeve (42). Discard grease fittings.
9.
10.
Remove clamp (36) and brake ring (35).
11.
Loosen nut (38) and remove master cylinder (41).
Remove plug (40), gasket (39), and nut (38) from master cylinder (41). Discard gasket.
12.
WARNING
Spring is under pressure. Use care when disassembling inertia brake actuator. Failure
to follow this warning may result in serious injury to personnel.
Back off nut (47) and remove towbar assembly (43) and bellows (44) from sleeve (42).
13.
Remove pushrod (46) and spring (45) from sleeve (42).
14.
TA700962
4-58
