TM 9-2330-376-14&P
4 - 3 5 . INERTIA BRAKE ACTUATOR AND MASTER CYLINDER ASSEMBLY MAINTENANCE
( X M 9 7 9 AND XM1061) (Con't).
e.
INSTALLATION
1.
Install connector (2) with tube assembly (3) attached to rear of inertia brake actuator assembly(1).
2.
Install retainer (11) and new seal (8) on inertia brake actuator assembly (1) with eight new Iockwashers (9) and
screws (10).
3.
Slide inertia brake actuator assembly (1) into reach tube (4).
4.
Install ten flatwashers (6) and screws (7). Apply sealing compound to screws. Torque screws to 190 Ib.-ft.
(258
5.
If removed, install two new plugs (5) in reach tube (4).
FOLLOW-ON TASKS:
Install reach tube (para 4-48).
Lubricate inertia brake actuator and master cylinder (Chapter 3, Section I).
TA700965
4-61
