TM 9-4120-378-14
5.18 SOLENOID VALVES. - continued
Remarks
Action
Location/Item
Solenoid L1
Installation
a. Solder valve body on tubing.
b. Secure body to housing with two screws (5), two
nuts (6), and two spacers (7) securing the valve
body to the housing. Install from outside of housing
into valve body.
c. Connect electrical connector of solenoid coil to
bulkhead.
See paragraph 5.25.
d. Replace dehydrator.
See paragraph 5.7.
e. Leak test refrigeration system.
See paragraph 5.8.
f. Evacuate refrigeration system.
See paragraph 5.9.
g. Charge refrigeration system.
See paragraph 4.17.
h. Install rear top cover.
5-59
