TM 9-4120-378-14
5.18 SOLENOID VALVES. - continued
Remarks
Action
Location/Item
Solenoid L1
a.
Disconnect electrical connector of solenoid coil
Removal
from bulkhead.
Remove plunger nut (1) and nameplate (2) from
b.
plunger (4) and remove coil (3).
Remove two screws (5), two nuts (6) and two
c.
spacers (7) securing the valve body to the housing.
See paragraph 5.5.
Purge system.
d.
See paragraph 5.6.
Debraze and remove valve.
e.
Solenoid L2
See paragraph 5.5.
Purge system.
Installation
See paragraph 5.6.
Braze valve body.
Install coil and secure to plunger with plunger nut (1).
See paragraph 5.25.
Connect electrical leads.
See paragraph 5.7.
Replace dehydrator.
See paragraph 5.8.
Leak test refrigeration system.
See paragraph 5.9.
Evacuate refrigeration system.
See paragraph 4.17.
Charge refrigeration system.
Install rear top cover.
5-58
