TM 9-2330-356-14
Figure 5-2. Upper and Lower Torque
Rods (M967, M969,
and M970 except
M970
-
SN TC-0843, TC-0844, and TC-103 thru TC-178).
positioned as close as possible to the lower torque rod
M970 except M970 SN TC-0843, TC-0844, and TC-
brackets on the axles.
103 thru T-178).
Removal (FIgs. 5-3 and 5-4).
a.
(3) Position a
jack under the torque rod bracket
on the trunnion cross tube. Jack up the trunnion cross tube
(1) Position semitrailer on hard level surface with
until the weight of the vehicle is removed from the spring
front resting on landing gear.
to be removed, Put supports or cribbing under the rear
corners of the semitrailer frame.
(2) Jack Up the front and rear axles on the side
where the spring is to be removed until wheels arc
approximately l-inch off the ground. The jacks should be
Change 3