TM 9-2330-356-14
(3) Install cable through the guides and latches,
e.
Replacement of Door Spring (M970 and M970A1).
and secure with cable clamps. Adjust length of cable to
ensure full release and engagement of both latches.
(1) Remove cotter pin (14) and washer (15) from
one end of pin (17). Remove pin (17) from spring (16).
d.
Replacement of Trip Bar (M970 and M970A1).
Repeat at other end of spring (16).
(1) Remove nut (6), washer (5), screw (1), washer
(2), trip bar (3), and washer (4).
(2) Aline spring (16) in either door or frame
bracket. Push pin (17) through spring (16) and bracket,
(2) Assemble screw (1), washer (2), trip bar (3),
Secure with washers (15) and cotter pins (14). Repeat at
and washer (4).
other end of spring (16).
(3) Push screw (1) through hole in frame (7) and
secure with washer (5) and nut (6).
f.
