TM 9-4120-408-14
6-4. CONDENSER HOUSING MAINTENANCE. (Continued)
Figure 6-1. Condenser Housing.
b. Repair.
(1) Inspect condenser housing (1) for corrosion, cracks, bends, breaks, holes, severe damage, or missing rivnuts,
rivets, and self clinching studs. Replace damaged or missing rivnuts, rivets, and self clinching studs,
(2) Replace or repair condenser housing (1) if it is unable to protect components from environmental damage or
provide EMI shielding.
(3) Refer to TM 5-625 and TM 5-745 for sheet metal repair procedures.
c. Install . Follow on maintenance:
(1) Refer to paragraph 5-15 and install condenser coil.
(2) Refer to paragraph 5-14 and install new dehydrator.
(3) Refer to paragraph 5-13 and install liquid line receiver.
(4) Refer to paragraph 5-12 and install condenser tubing and fittings.
(5) Refer to paragraph 5-10 and install condenser pressure switches.
(6) Refer to paragraph 5-9 and install data plates and spring clip.
(7) Refer to paragraph 5-8 and install curbside lifting ring.
6-3
